Mezuzah | Gray | Wide | Shin | Orange | Side

The Mezuzah, affixed at the entrance to our home and every room, is the first design element that greets us. Thanks to its minimalist and unconventional design, which exudes presence and offers a contemporary interpretation of the ancient Jewish symbol (three colored stripes representing the Hebrew letter 'Shin' of Shaddai) – this new Mezuzah connects past, present, and future.

Combining the durable properties of Corian, the unbreakable brass screw, and ease of use – this Mezuzah can be well-preserved for many years.

Made from upcycled Corian.
Crafted through a unique process where Corian waste was collected and renewed.

> Color: Gray and Orange
> Glossy finish
> 100% green product
> Certificate: Green Product
> Dimensions: Length: 15 cm, Width: 3.5 cm, Depth: 2 cm
> The Mezuzah comes without a scroll. It is suitable for a 10 cm scroll.

> Our products arrive packaged and protected.
> Handcrafted from Corian, a material developed 50 years ago as a surface for demanding work environments, marketed worldwide since 1971, and imported to Israel for about 40 years. The primary uses of CORIAN include: countertops, sinks, and wall cladding for kitchen, bath, and many other residential and institutional applications.

How to affix the Mezuzah case to the doorframe for long-lasting adhesion?

For doorframes with a rough finish, such as a wall/delicate plaster:
Smooth the surface with sandpaper, wipe away dust with a damp cloth, and finally wipe with a dry cloth. The smoother the surface, free of dust or holes, the more perfectly the Mezuzah will adhere.
Remove the protective cover from the adhesive. Be careful not to touch the adhesive; hold the sides of the Mezuzah and press it onto the doorframe in the desired location. Apply light pressure for about 30 seconds for good adhesion.

For rough natural wood doorframes:
It is recommended to lightly sand the surface with sandpaper, then clean off dust with a cloth/paper towel. Remove the protective cover from the adhesive. Be careful not to touch the adhesive; hold the sides of the Mezuzah and press it onto the doorframe in the desired location. Apply light pressure for about 30 seconds for good adhesion.

For smooth doorframes such as lacquered wood/painted metal/stainless steel/glass/Formica:
Clean the surface of grease and dust with a damp cloth and wipe. Only after the area is dry can you affix the Mezuzah. Remove the protective cover from the adhesive. Be careful not to touch the adhesive; hold the sides of the Mezuzah and press it onto the doorframe in the desired location. Apply light pressure for about 30 seconds for good adhesion.

General:

The brass is a soft material, so it is recommended to gently open the brass screw with a screwdriver wrapped in a wide rubber band.
It is recommended to insert the scroll into the Mezuzah before affixing it to the doorframe.
When inserting the scroll into the Mezuzah case, ensure that the word "Shaddai" faces upwards relative to the Mezuzah's hanging direction.